1. Stand on the PWC in an operating stance (Stance you would use while operating the ski). On the port side, mark area where the back of your calf is.

2. Attach the rescue ring “U” bolt in a horizontal fashion behind the area your leg rests and just below the base of the seat, but above the top of the foot gunnels. (see fig. 1)

3. Attach the rescue ring.

4. The distance of the rescue ring should allow the end of the ring (when ring is folded) to meet up with the first 1/3rd of the board. The adjustment can be made by putting an overhand not in the rescue ring rope.This should allow the person getting rescued to be placed directly onto the rescue board.

Shown Here is a brief rundown on how to use the rescue ring!

1.The rider holds the ring out for the rescue (see fig 2)

2..The person being rescued interlace his arm into the rescue ring as the rider comes by, swinging him up and on to the Rescue Matt.(see fig 3)

GO BACK TO SUPPORT PAGE NOW!