HSA is the only company to produce a line of tow ropes and handles specific to tow surfing. We continually source new materials to bring you the most advanced equipment possible. All ropes & handles have safety, function and craftsmanship built in. Please bear in mind, that these tow ropes are not for heavy static pulling. These ropes were not designed for dragging your PWC on the sand on a remote beach with your truck.

The Old School (Our first tow specific rope)
Tow surfers have loved this rope for years. The "old school" is the first rope we produced specific to tow surfing.

1 1/4" diameter hollow core polypropylene material. All ropes floats & do not absorb water.

All HSA ropes Incorporate a Delron thimble (PWC attachment point) to eliminate wear on polypropylene material

Protective vinyl sheath from the PWC contact point out 10 feet greatly reduces the risk of rope being sucked into an intake grate.

Strong, light and is less drag in areas where windy conditions and high
seas are commonCost

$175.00 per rope only

The Cushy
2 1/2" of hollow core polypropylene material

All the evolution and technology of the "Old School" rope above combined with new materials and innovations

The large material diameter of this rope is forgiving, easy to grab even after a day of towing with tired hands

The last 10’ of this rope is filled with float foam, which serves the dual role of maintaining the ropes circumference, as well as making it the easiest rope to “short- hand"

The slight elasticity built into the rope reduces the fatigue a day "on the rope" causes

Cost $ 210.00 per rope only

The Handle's (Regular & Braided leader)
Inside diameter is considerably smaller than a water ski handle

Designed to greatly reduce the potential of an arm, leg or head entrapment

Grip is extra cushy EVA rubber that reduces hand & finger fatigue The braided handle is the same as 12” handle with added 5’ textured leader, so that you can tell by feel exactly when the handle is nearing you. Additionally, this allows you to changes rope lengths with one rope.

Cost $60.00 & $80.00

Quick Release Assembly
Stainless steel snap shackle with 1" tubular loop webbing attached to pull pin

Other end of tubular loop webbing is attached to the hull on the port side near the operator's calf

Allows operator to deploy ANYTHING attached to quick release effortlessly and instantly

With one pull you can be separated from hazards

Cost $75.00


To see how to install this item go to support page now!